Config Ipxrip Vlan Max-Packet-Size - Extreme Networks ExtremeWare Command Reference Manual

IPX Commands

config ipxrip vlan max-packet-size

config ipxrip vlan [<vlan name> | all] max-packet-size <size>
Description
Configures the maximum transmission unit (MTU) size of the IPX/RIP packet.
Syntax Description
vlan name
all
size
Default
The default setting is 432 bytes.
Usage Guidelines
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN.
Example
The following command configures an MTU size of 128 for the IPX/RIP packet:
config ipxrip vlan accounting max-packet-size 128
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
1190
Specifies a VLAN name.
Specifies all VLANs.
Specifies the maximum packet size in bytes.
ExtremeWare Software 7.0.0 Command Reference Guide