Udp Echo Server - Extreme Networks ExtremeWare XOS Guide Manual
Concepts guide
Hide thumbs
Also See for ExtremeWare XOS Guide:
- Command reference manual (2024 pages) ,
- Manual (698 pages) ,
- Command reference manual (1712 pages)
Table of Contents
Advertisement
Configuring DHCP/BOOTP Relay
UDP Echo Server
You can use UDP Echo packets to measure the transit time for data between the transmitting and
receiving end.
To enable UDP echo server support, use the following command:
rtlookup
To disable UDP echo server support, use the following command:
enable bootp vlan
ExtremeWare XOS 10.1 Concepts Guide
183
Advertisement
Table of Contents
