Show Ipstats - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

show ipstats

show ipstats {vlan <vlan name>}
Description
Displays IP statistics for the CPU for the switch or for a particular VLAN.
Syntax Description
vlan name
Default
N/A.
Usage Guidelines
This command only shows statistics of the CPU-handled packets. Not all packets are handled by the
CPU.
The fields displayed in the
Table 22: Global IP Statistics Field Definitions
Field
InReceives
InUnicast
InBcast
InMcast
InHdrEr
Bad vers
Bad chksum
Short pkt
Short hdr
Bad hdrlen
Bad length
InDelivers
Bad Proto
OutRequest
OutDiscard
OutNoRoute
Forwards
ForwardOK
Fwd Err
1246
Specifies a VLAN name.
command are defined in Table 22 though Table 26.
show ipstats
Definition
Total number of incoming IP packets processed by the CPU.
Total number of unicast IP packets processed by the CPU.
Total number of broadcast IP packets processed by the CPU.
Total number of multicast IP packets processed by the CPU.
Total number of packets with an IP Header Error forwarded to the CPU.
Total number of packets with a version other than IP v4 in the IP version field.
Total number of packets with a bad IP checksum forwarded to the CPU.
IP packets that are too short.
IP packets with a header that is too short.
IP packets with a header length that is less than the length specified.
IP packets with a length less than that of the header.
IP packets passed to upper layer protocols.
IP packets with unknown (not standard) upper layer protocol.
IP packets sent from upper layers to the IP stack.
IP packets that are discarded due to lack of buffer space or the router
interface being down, or broadcast packets with broadcast forwarding
disabled.
IP packets with no route to the destination.
ForwardOK and Fwd Err aggregate count.
Total number of IP packets forwarded correctly.
Total number of IP packets that cannot be forwarded.
ExtremeWare Software 7.3.0 Command Reference Guide