Show Iparp - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

show iparp

show iparp {<ip address> | <mac_address> | vlan <vlan name> | permanent}
Description
Displays the IP Address Resolution Protocol (ARP) table. You can filter the display by IP address, MAC
address, VLAN, or permanent entries.
Syntax Description
ip address
mac_address
vlan name
permanent
Default
Show all entries.
Usage Guidelines
Displays the IP ARP table, including:
• IP address
• MAC address
• Aging timer value
• VLAN name, VLAN ID and port number
• Flags
Example
The following command displays the IP ARP table:
show iparp 10.1.1.5/24
History
This command was available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.2.1 to provide the MAC address option.
Platform Availability
This command is available on all platforms.
1238
Specifies an IP address.
Specifies a MAC address.
Specifies a VLAN name.
Specifies permanent entries.
ExtremeWare Software 7.3.0 Command Reference Guide