Table of Contents
Advertisement
Configuration and Image File Commands
78-20269-01 Command Line Interface Reference Guide
interface fastethernet 2
ip address 1.100.100.100 255.0.0.0
switchport mode trunk
switchport general map macs-group 1 vlan 111
switchport general map subnets-group 1 vlan 113
switchport general map protocols-group 1 vlan 112
switchport general ingress-filtering disable
switchport general acceptable-frame-type untagged-only
switchport general pvid 111
switchport trunk native vlan 22
7.10
show startup-config
The show startup-config Privileged EXEC mode command displays the startup
configuration file contents.
Syntax
show startup-config
Parameters
interface-id-list
interface
one of the following types: Ethernet port, Port-channel or VLAN.
Command Mode
Privileged EXEC mode
User Guidelines
The Startup Configuration file does not contain all the information that can be
displayed in the output. Only non-default configurations are displayed.
[interface interface-id-list]
—Specifies list of interface IDs. The interface IDs can be
7
129
Advertisement
Table of Contents
