Show Zone Analysis - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show zone analysis

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show zone analysis
To display detailed analysis and statistical information about the zoning database, use the show zone
analysis command.
Syntax Description active
vsan vsan-id
zoneset name
Defaults
None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples
The following example displays detailed statistics and analysis of the active zoning database.
switch# show zone analysis active vsan 1
Cisco MDS 9000 Family Command Reference
22-446
show zone analysis {active vsan vsan-id | vsan vsan-id | zoneset name vsan vsan-id} |
Displays analysis information for the active zone set.
Displays analysis information for the specified VSAN ID. The range is 1 to
4093.
Displays zone set analysis information for the specified zone set.
Modification
This command was introduced.
Zoning database analysis vsan 1
Active zoneset : zs1 [* | -]
Activated at: 14:36:56 UTC Oct 04 2005
Activated From: Local [CLI / SNMP / GS / CIM / INTERNAL] or
Merge [interface] or
Remote [Domain, IP-Address]
Default zone policy: permit/deny
Number of devices zoned in vsan: 8/10 (Unzoned: 2 | Default-zone: #)
Number of zone members resolved: 11/16 (Unresolved: 5)
Num zones: 1
Number of IVR zones: 2
Number of IPS zones: 3
Formatted database size: < 1 Kb / 2000 kb ( < 1% usage)
[Switch name]
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x