Show Mac Address-Table Move Update - Cisco Catalyst 3650 series Command Reference Manual

show mac address-table move update

show mac address-table move update
To display the MAC address-table move update information on the device, use the show mac address-table
move update command in EXEC mode.
show mac address-table move update
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples This example shows the output from the show mac address-table move update command:
Device# show mac address-table move update
Switch-ID : 010b.4630.1780
Dst mac-address : 0180.c200.0010
Vlans/Macs supported : 1023/8320
Default/Current settings: Rcv Off/On, Xmt Off/On
Max packets per min : Rcv 40, Xmt 60
Rcv packet count : 10
Rcv conforming packet count : 5
Rcv invalid packet count : 0
Rcv packet count this min : 0
Rcv threshold exceed count : 0
Rcv last sequence# this min : 0
Rcv last interface : Po2
Rcv last src-mac-address : 0003.fd6a.8701
Rcv last switch-ID : 0303.fd63.7600
Xmt packet count : 0
Xmt packet count this min : 0
Xmt threshold exceed count : 0
Xmt pak buf unavail cnt : 0
Xmt last interface : None
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
964
Modification
This command was introduced.