Debug Fcsp-Mgr - Cisco MDS 9000 series Command Reference Manual

debug fcsp-mgr

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fcsp-mgr
To enable debugging for the Fibre Channel Security Protocol (FC-SP) manager, use the debug fcsp-mgr
command in EXEC mode. To disable a debug command, use the no form of the command or use the no
debug all command to turn off all debugging.
Syntax Description
all
critical
datastructure
dhchap
error
event-gen
fc2
fsm
general
ha
init
level1
level2
level3
level4
level5
message
mts
notify
trace
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.3(2)
Cisco MDS 9000 Family Command Reference
6-46
debug fcsp-mgr {all | critical | datastructure | dhchap | error | event-gen | fc2 | fsm | general |
ha | init | level1 | level2 | level3 | level4 | level5 | message | mts | notify | trace}
no debug fcsp-mgr {all | critical | datastructure | dhchap | error | event-gen | fc2 | fsm | general
| ha | init | level1 | level2 | level3 | level4 | level5 | message | mts | notify | trace}
Modification
This command was introduced.
Enables debugging for all FC-SP features.
Enables debugging of FC-SP critical errors.
Enables debugging of FC-SP data structures.
Enables debugging of DHCHAP.
Enables debugging of FC-SP error.
Enables debugging of FC-SP event generation.
Enables debugging of FC-SP FC2 messages.
Enables debugging of FC-SP events.
Enables general debugging of FC-SP.
Enables debugging of FC-SP High Availability
Enables debugging of FC-SP Initialization.
Sets debugging level of FC-SP Mgr to 1.
Sets debugging level of FC-SP Mgr to 2.
Sets debugging level of FC-SP Mgr to 3.
Sets debugging level of FC-SP Mgr to 4.
Set debugging level of FC-SP Mgr to 5.
Enables debugging of FC-SP messages.
Enables debugging of FC-SP MTS messages.
Sets debug level to notify.
Enables debugging of FC-SP function enter/exit.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x