Ssh6 - Cisco Nexus 5500 Series Command Reference Manual

Chapter S Commands

ssh6

To create a Secure Shell (SSH) session using IPv6, use the ssh6 command.
Syntax Description
username
ipv6-address
hostname
vrf vrf-name
default
management
Command Default Default VRF
Command Modes EXEC mode
Command History Release
5.2(1)N1(1)
Usage Guidelines The switch supports SSH version 2.
Examples This example shows how to start an SSH session using IPv6:
switch# ssh6 2001:0DB8::200C:417A vrf management
Related Commands Command
clear ssh session
ssh
ssh server enable
OL-27883-02
ssh6 [username@]{ipv6-address | hostname} [vrf {vrf-name | default | management}]
(Optional) Username for the SSH session. The username is not case sensitive
and has a maximum of 64 characters.
IPv6 address of the remote host.
Hostname of the remote host. The hostname is case sensitive and has a
maximum of 64 characters.
(Optional) Specifies the virtual routing and forwarding (VRF) name to use
for the SSH IPv6 session. The name can be a maximum of 32 alphanumeric
characters.
Specifies the default VRF.
Specifies the management VRF.
Modification
This command was introduced.
Description
Clears SSH sessions.
Starts an SSH session using IPv4 addressing.
Enables the SSH server.
Cisco Nexus 5500 Series NX-OS Security Command Reference
ssh6
243