Aaa Authentication Login Password-Aging Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

aaa authentication login password-aging enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
aaa authentication login password-aging enable
To configure password aging notifcation from AAA server , use the aaa authentication login
password-aging enable in configuration mode. To revert to factory defaults, use the no form of the
command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History Release
3.2(1)
Usage Guidelines
Specify the currently configured command preceded by a no in order to revert to the factory defaults.
Note This command is supported by the TACACS+ protocol. If you try to use the RADIUS protocol by
enabling this feature, RADIUS will generate a SYSLOG message and authentication will fall back to
local.
Examples The following example enables password aging notification from AAA server:
switch# config terminal
switch(config)# aaa authentication login password-aging enable
The following example reverts to the Password Authentication Password (PAP) authentication method
(default):
switch(config)# no aaa authentication login password-aging enable
Related Commands Command
show aaa
authentication login
password-aging
Cisco MDS 9000 Family Command Reference
2-8
aaa authentication login password-aging enable
no aaa authentication login password-aging enable
Modification
This command was introduced.
Description
Displays the status of the password aging notification (enabled/disabled).
Chapter 2 A Commands
OL-18089-02, Cisco MDS NX-OS Release 4.x