Ipv6 Dhcp-Ldra Attach Policy (Interface) - Cisco Nexus 7000 Series Command Reference Manual

I Commands

ipv6 dhcp-ldra attach policy (interface)

To enable the Lightweight DHCPv6 Relay Agent (LDRA) feature on an interface, use the ipv6 dhcp-ldra
command.
ipv6 dhcp-ldra attach-policy {client-facing-trusted| client-facing-untrusted| client-facing-disable|
server-facing}
no ipv6 dhcp-ldra attach-policy {client-facing-trusted| client-facing-untrusted| client-facing-disable|
server-facing}
Syntax Description
client-facing-trusted
client-facing-untrusted
client-facing-disable
server-facing
Command Default
Disabled
Command Modes
Interface configuration
Command History
Release
7.3(0)D1(1)
Usage Guidelines
To use this command, you must enable the LDRA feature by using the ipv6 dhcp-ldra command.
Examples This example shows how to enable the LDRA feature on the specified interface:
switch(config)# ipv6 dhcp-ldra
switch(config)# interface ethernet 0/0
switch(config-if)# switchport
switch(config-if)# ipv6 dhcp-ldra attach-policy client-facing-trusted
This example shows how to disable the LDRA feature on the specified interface:
switch(config-if)# no ipv6 dhcp-ldra attach-policy client-facing-trusted
Related Commands
Command
ipv6 dhcp-ldra
ipv6 dhcp-ldra attach policy (interface)
Specifies client-facing interfaces or ports as trusted.
Specifies client-facing interfaces or ports as untrusted.
Disables LDRA functionality on an interface or port.
Specifies an interface or port as server facing.
Modification
This command was introduced.
Description
Enables the LDRA feature.
Cisco Nexus 7000 Series Security Command Reference
443