Show Rmon Log - Cisco 300 Series Cli Manual

21
316
Command Mode
EXEC mode
Example
The following example displays the RMON event table.
switchxxxxxx# show rmon events
Index Description
----- -----------
1
Errors
2 High
Broadcast
The following table describes significant fields shown in the display:
Field Description
Index Unique index that identifies this event.
Description Comment describing this event.
Type Type of notification that the device generates about
this event. Can have the following values: none, log,
trap, log-trap. In the case of log, an entry is made in
the log table for each event. In the case of trap, an
SNMP trap is sent to one or more management
stations.
Community If an SNMP trap is to be sent, it is sent with the
SNMP community string specified by this octet
string.
Owner The entity that configured this event.
Last time The time this entry last generated an event. If this
sent entry has not generated any events, this value is
zero.

21.10 show rmon log

Use the show rmon log EXEC mode command to display the RMON log table.
Syntax
event
show rmon log [
Remote Network Monitoring (RMON) Commands
Type Community
------ ---------
Log router
Log
Trap
]
78-21075-01 Command Line Interface Reference Guide
Owner Last time sent
------ ------------------
CLI Jan 18 2006 23:58:17
Manager Jan 18 2006 23:59:48