Configure The Router - 3Com MSR 50 Series Configuration Manual

3com msr 30-16: software guide

Hide thumbs Also See for MSR 50 Series:

Table of Contents

ONFIGURATION

[Switch] interface ethernet 1/0

[Switch-Ethernet1/0] port-isolate enable group 2

[Switch-Ethernet1/0] interface ethernet 1/1

[Switch-Ethernet1/1] port-isolate enable group 2

[Switch-Ethernet1/1] interface ethernet 1/2

[Switch-Ethernet1/2] port-isolate uplink-port group 2

2 Configure the Router

# Create VLAN 2, and add Ethernet 1/0 to VLAN 2.

<Router> system-view

[Router] vlan 2

[Router-vlan2] port ethernet 1/0

[Router-vlan2] interface vlan-interface 2

[Router-Vlan-interface2] ip address 192.168.10.100 255.255.0.0

Ping Host B on Host A to verify that Host B cannot be pinged, which indicates they

are isolated at Layer 2.

# Configure local proxy ARP to let Host A and Host B communicate at Layer 3.

[Router-Vlan-interface2] local-proxy-arp enable

[Router-Vlan-interface2] quit

Ping Host B on Host A to verify that Host B can be pinged, which indicates Layer 3

communication is implemented.

Show Quick Links

Table of Contents