Configuring Ospf Priority; Configuring Ospf Route Redistribution - 3Com MSR 50 Series Configuration Manual

Configuring OSPF
Priority
Configuring OSPF Route
Redistribution
Follow these steps to configure the maximum number of load-balanced routes:
To do...
Enter system view
Enter OSPF view
Configure the maximum
number of equivalent
load-balanced routes
A router may run multiple routing protocols. The router sets a priority for each
protocol, when a route found by several routing protocols, the route found by the
protocol with the highest priority will be selected.
Follow these steps to configure the priority for OSPF:
To do... Use the command...
Enter system view system-view
Enter OSPF view ospf [ process-id | router-id
router-id | vpn-instance
instance-name ] *
Configure OSPF preference [ ase ]
route priority [ route-policy
route-policy-name ] value
Follow these steps to configure OSPF route redistribution:
To do...
Enter system view
Enter OSPF view
Configure OSPF to
redistribute routes from other
protocols
Configure OSPF to filter
redistributed routes before
advertisement
Redistribute a default route
Configuring OSPF Routing Information Control
Use the command...
system-view
ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
maximum load-balancing maximum
Use the command...
system-view
ospf [ process-id | router-id router-id
| vpn-instance instance-name ] *
import-route protocol [ process-id |
allow-ibgp ] [ cost cost | type type |
tag tag | route-policy
route-policy-name ]*
filter-policy { acl-number | ip-prefix
ip-prefix-name } export [ protocol
[ process-id ] ]
default-route-advertise [ always |
cost cost | type type | route-policy
route-policy-name ]*
default-route-advertise summary
cost cost
Remarks
-
-
Optional
Remarks
-
-
Optional
The priority of OSPF internal routes
defaults to 10
The priority of OSPF external routes
defaults to 150
Remarks
-
-
Required
Not configured by
default
Optional
Not configured by
default
Optional
Not redistributed by
default
945