Configuring The Maximum Number Of External Lsas In Lsdb; Making External Route Selection Rules Defined In Rfc1583 Compatible; Logging Neighbor State Changes; Configuring Ospf Network Management - 3Com MSR 50 Series Configuration Manual

Configuring the
Maximum Number of
External LSAs in LSDB
Making External Route
Selection Rules Defined
in RFC1583 Compatible
Logging Neighbor State
Changes
Configuring OSPF
Network Management
To do...
Enable OSPF to add interface
MTU into DD packets
Follow these steps to configure the maximum number of external LSAs in the Link
State Database:
To do...
Enter system view
Enter OSPF view
Specify the maximum number
of external LSAs in the LSDB
The selection of an external route from multiple LSAs defined in RFC2328 is
different from the one defined in RFC1583.
Follow these steps to make external route selection rules defined in RFC1583
compatible:
To do...
Enter system view
Enter OSPF view
Make RFC1583 compatible
Follow these steps to log neighbor state changes
To do... Use the command...
Enter system view system-view
Enter OSPF view ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
Enable the logging of log-peer-change
neighbor state
changes
Follow these steps to configure OSPF network management:
To do...
Enter system view
Bind OSPF MIB to an
OSPF process
Configuring OSPF Network Optimization
Use the command...
ospf mtu-enable
Use the command...
system-view
ospf [ process-id | router-id
router-id | vpn-instance
instance-name ] *
lsdb-overflow-limit number Optional
Use the command...
system-view
ospf [ process-id | router-id
router-id | vpn-instance
instance-name ] *
rfc1583 compatible
Use the command...
system-view
ospf mib-binding process-id
951
Remarks
Optional
Not enabled by default, that
is, the interface fills in a value
of 0
Remarks
-
-
No limitation by default
Remarks
-
Required
Optional
Compatible by default
Remarks
-
-
Optional
Enabled by default
Remarks
-
Optional
The first OSPF process
bound with OSPF MIB by
default