3Com MSR 50 Series Configuration Manual page 372

372 C 19: PPP
HAPTER AND
MP C
ONFIGURATION
To do...
Assign an IP Define global
address for the address pool and
peer using global use it to allocate
address pool or an IP address for
directly specify an the peer
IP address for the
peer (use either
method)
Directly specify
an IP address for
the peer
Follow the following steps to configure the device as server for PPP users that need
authentication:
To do...
Enter system view
Enter the specified domain
view
Define domain address pool
Exit to system view
Enter the specified interface
view
Assign IP address for PPP user
through domain address pool
Forbid the remote end to use
fixed IP address configured by
itself
Note that the domain used in defining the pool address is the domain specified
when performing PPP authentication.
Configuring DNS address negotiation
Follow these steps to configure DNS address negotiation:
To do...
Enter system view
Enter the specified interface view
Use the command...
ip pool pool-number
low-ip-address
[ high-ip-address ]
interface interface-type
interface-number
remote address pool
[ pool-number ]
interface interface-type
interface-number
remote address
ip-address
Use the command...
system-view
domain domain-name
ip pool pool-number
low-ip-address
[ high-ip-address ]
quit
interface interface-type
interface-number
remote address pool
[ pool-number ]
ppp ipcp remote-address
forced
Use the command...
system-view
interface interface-type
interface-number
Remarks
Required
If remote address pool
is configured without
specifying pool-number,
the global address pool 0
is used by default.
Required
Remarks
-
Required
Required
-
-
Required
If remote address pool is
configured but without
specifying pool-number, the
address pool under this
domain is used in turn for IP
address allocation.
Optional
By default, IP address
negotiation in PPP IPCP does
not forbid the remote end to
use fixed IP address
configured by itself.
Remarks
-
-