3Com MSR 50 Series Configuration Manual page 402

402 C 20: PPP E C
HAPTER O ONFIGURATION
# Add a PPPoE user
<RouterB> system-view
[RouterB] local-user user1
[RouterB-luser-user1] password simple 123456
[RouterB-luser-user1] service-type ppp
[RouterB-luser-user1] quit
# Configure the ATM interface.
[RouterB] interface atm 1/0
[RouterB-Atm1/0] pvc 0/32
[RouterB-atm-pvc-Atm1/0-0/32] map bridge virtual-ethernet 1
[RouterB-atm-pvc-Atm1/0-0/32] quit
[RouterB-Atm1/0] quit
# Enable PPPoE server on the virtual Ethernet interface.
[RouterB] interface virtual-ethernet 1
[RouterB-Virtual-Ethernet1] pppoe-server bind virtual-template 1
[RouterB-Virtual-Ethernet1] mac-address 0022-0022-00c1
[RouterB-Virtual-Ethernet1] quit
# Configure the parameters of the virtual template.
[RouterB] interface virtual-template 1
[RouterB-Virtual-Template1] ppp authentication-mode pap domain system
[RouterB-Virtual-Template1] remote address pool 1
[RouterB-Virtual-Template1] ip address 1.1.1.1 255.0.0.0
[RouterB-Virtual-Template1] quit
# Apply RADIUS authentication to the domain users.
[RouterB] domain system
[RouterB-isp-system] authentication ppp radius-scheme cams
# Add a local IP address pool that contains nine IP addresses.
[RouterB-isp-system] ip pool 1 1.1.1.2 1.1.1.10
[RouterB-isp-system] quit
# Configure RADIUS scheme
[RouterB] radius scheme cams
[RouterB-radius-cams] primary authentication 10.110.91.146 1812
[RouterB-radius-cams] primary accounting 10.110.91.146 1813
[RouterB-radius-cams] key authentication expert
[RouterB-radius-cams] key accounting expert
[RouterB-radius-cams] server-type extended
[RouterB-radius-cams] user-name-format with-domain
[RouterB-radius-cams] quit
For detailed configuration of RADIUS, refer to "Configuring RADIUS" on page
1769.