Configuring The Spid Of The Isdn Ni Protocol - 3Com MSR 50 Series Configuration Manual

428 C 22: ISDN C
HAPTER
n
Configuring the SPID of
the ISDN NI Protocol
ONFIGURATION
Table 9 Types and code schemes of ISDN numbers
Field (Bit) value
Type
Protocol 8 7
NTT 0
0
0
1
QSIG 0
0
0
0
0
0
0
0
0
1
The undefined bits in all the protocols are reserved for other purposes.
You may configure SPID on the BRI interfaces that are running the ISDN NI
protocol.
Follow these steps to configure the SPID parameters of the ISDN NI protocol:
To do...
Enter system view
Enter specified interface view
Code scheme
6 5 4 3 2 1 Definition
0 0 Unknown
1 0 National number
1 1 Network specific number
0 0 Subscriber number
0 0 0 0 Unknown
0 0 0 1 ISDN/telephony numbering plan
(Recommendation E.164)
1 0 0 1 Private numbering plan
0 0 0 0 0 0 Unknown number in Unknown numbering plan
0 0 0 0 0 1 Unknown number in ISDN/Telephony numbering
plan (ITU-T Rec.E.164/E.163)
0 1 0 0 0 1 International number in ISDN/Telephony
numbering plan (ITU-T Rec.E.164/E.163)
1 0 0 0 0 1 National number in ISDN/Telephony numbering
plan (ITU-T Rec.E.164/E.163)
1 1 0 0 0 1 Subscriber number in ISDN/Telephony
numbering plan (ITU-T Rec.E.164/E.163)
0 0 1 0 0 1 Unknown number in private numbering plan
0 1 1 0 0 1 Level 2 regional number in private numbering
plan
1 0 1 0 0 1 Level 1 regional number in private numbering
plan
1 1 1 0 0 1 PISN specific number in private numbering plan
0 0 1 0 0 1 Level 0 regional number in private numbering
plan
Use the command...
system-view
interface interface-type
interface-number
Remarks
-
-