3Com MSR 50 Series Configuration Manual page 870

870 C 56: BGP C
HAPTER ONFIGURATION
[RouterE-bgp] confederation id 200
[RouterE-bgp] confederation 200
[RouterE-bgp] peer 10.1.4.1 as-number 65001
[RouterE-bgp] peer 10.1.5.1 as-number 65001
[RouterE-bgp] quit
4 Configure the EBGP connection between AS 100 and AS 200.
# Configure Router A.
[RouterA] bgp 65001
[RouterA-bgp] peer 200.1.1.2 as-number 100
[RouterA-bgp] quit
# Configure Router F.
<RouterF> system-view
[RouterF] bgp 100
[RouterF-bgp] router-id 6.6.6.6
[RouterF-bgp] peer 200.1.1.1 as-number 200
[RouterF-bgp] network 9.1.1.0 255.255.255.0
[RouterF-bgp] quit
5 Verify the configuration.
# Display BGP routing table information on Router B.
[RouterB] display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
Network
*>i 9.1.1.0/24
[RouterB] display bgp routing-table 9.1.1.0
BGP local router ID : 2.2.2.2
Local AS number : 65002
Paths: 1 available, 1 best
BGP routing table entry information of 9.1.1.0/24:
From : 10.1.1.1 (1.1.1.1)
Relay Nexthop : 0.0.0.0
Original nexthop: 10.1.1.1
AS-path : (65001) 100
Origin : igp
Attribute value : MED 0, localpref 100, pref-val 0, pre 255
State : valid, external-confed, best,
Not advertised to any peers yet
# Display BGP routing table information on Router D.
[RouterD] display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 4.4.4.4
Status codes: * - valid, > - best, d - damped,
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
Network
i - internal, s - suppressed, S - Stale
NextHop MED
10.1.1.1 0
i - internal, s - suppressed, S - Stale
NextHop MED
LocPrf PrefVal Path/Ogn
100 0 (65001) 100i
LocPrf PrefVal Path/Ogn