Displaying And Maintaining Atm - 3Com MSR 50 Series Configuration Manual

Displaying and
Maintaining ATM
To do...
Set the PPP authentication
mode and IP address; with the
PPPoE server, an address pool
should be configured to
allocate IP address for the
peer end; with the PPPoE
client, address negotiation
should be configured to
accept the IP address
allocated by the server end.
Quit to system view
Create a VE interface
Configure PPPoE parameters
on VE interface (the
configuration differs when
with a PPPoE server and when
with a PPPoE client)
Quit to system view
Enter ATM interface view
Create PVC, and enter PVC
view
Create PPPoEoA mapping for
PVC
n
As for the next hop and the outbound interface, only the former is required when
you configure a static route on a virtual-template interface. If you want to specify
the outbound interface as well, make sure the physical interface bound to the
virtual-template is valid.
To do...
Show the relevant information
of ATM interface
Show the relevant information
of the PVC
Show the information of the
PVC mapping
Display PVC-Group information
Show the relevant information
of the ATM-Class

Displaying and Maintaining ATM

Use the command...
Refer to "PPP and MP
Configuration" on page 363.
quit
interface virtual-ethernet
interface-number
Refer to "PPP and MP
Configuration" on page 363.
quit
interface atm
{ interface-number |
interface-number.subnumber
}
pvc { pvc-name [ vpi/vci ] |
vpi/vci }
map bridge
virtual-ethernet
interface-number
Use the command...
display atm interface [ atm
interface-number ]
display atm pvc-info
[ interface interface-type
interface-number [ pvc
{ pvc-name [ vpi/vci ] | vpi/vci } ] ]
display atm map-info
[ interface interface-type
interface-number [ pvc
{ pvc-name [ vpi/vci ] | vpi/vci } ] ]
display atm pvc-group
[ interface interface-type
interface-number [ pvc
{ pvc-name [ vpi/vci ] | vpi/vci } ] ]
display atm class
[ atm-class-name ]
139
Remarks
Required
-
Required
Required
-
-
Required
Required
The interface-number
argument refers to the VE
interface created in the above
steps.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view