Displaying And Maintaining The Dhcp Client; Dhcp Client Configuration Example - 3Com MSR 50 Series Configuration Manual

600 C 35: DHCP C
HAPTER
Displaying and
Maintaining the DHCP
Client
DHCP Client
Configuration
Example
C
LIENT ONFIGURATION
conflicted IP address is manually deleted and the interface is made UP again by
first executing the shutdown command and then the undo shutdown
command or the DHCP client is enabled on the interface by executing the
undo ip address dhcp-alloc and ip address dhcp-alloc commands in
sequence.
To do...
Display specified
configuration information
Network requirements
On a LAN, Router B contacts the DHCP server via Ethernet1/1 to obtain an IP
address.
Network diagram
See Figure 170.
Configuration procedure
The following is the configuration on Router B shown in
# Enable the DHCP client on Ethernet1/1.
<RouterB> system-view
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] ip address dhcp-alloc
n
To implement the DHCP client-server model, you need to perform related
configuration on the DHCP server. For details, refer to
Examples" on page
Use the command...
display dhcp client [ verbose ]
[ interface interface-type
interface-number ]
585.
Remarks
Available in any view
Figure 170.
"DHCP Server Configuration