Mp Ofr; Overview; Configuring Mpofr - 3Com MSR 50 Series Configuration Manual

11

Overview

Configuring MPoFR

MP FR
O
This section covers these topics:
"Overview" on page 235
■
"Configuring MPoFR" on page 265
■
"MPoFR Configuration Example" on page 266
■
Multilink PPP over frame relay (MPoFR) is PPPoFR making use of MP fragments to
transmit MP fragments over frame relay stations.
In MPoFR configuration, first configure PPPoFR on two or more virtual templates (it
is not necessary to configure IP address on virtual templates), and then perform
the following configurations on these virtual templates to bind them to another
virtual template with PPP MP.
Follow these steps to configure MPoFR:
To do...
Enter system view
Create a PPP MP virtual
template interface
Configure the maximum
bandwidth available for
current interface
Assign an IP address to
the current interface
Quit to system view
Use the command...
system-view
interface virtual-template
interface-number-mp
qos max-bandwidth bandwidth
ip address ip-address ip-mask
quit
Remarks
-
-
Optional
For virtual template,
the default
maximum
bandwidth is 64
kbps.
Required
-