Enabling The Advertisement And Reception Of Opaque Lsas; Configuring Ospf Graceful Restart; Configuring The Ospf Gr Restarter - 3Com MSR 50 Series Configuration Manual

952 C 58: OSPF C
HAPTER
Enabling the
Advertisement and
Reception of Opaque
LSAs
Configuring OSPF
Graceful Restart
Configuring the OSPF GR
Restarter
ONFIGURATION
To do...
Enable OSPF trap
Enter OSPF view
Enable messages
logging
With this feature enabled, the OSPF router can receive and advertise the Type 9,
Type 10 and Type 11 opaque LSAs.
Follow these steps to enable the advertisement and reception of opaque LSAs:
To do...
Enter system view
Enter OSPF view
Enable the advertisement and
reception of opaque LSAs
n
One device can act as both a GR Restarter and a GR Helper at the same time.
You can configure the IETF standard or non IETF standard OSPF Graceful Restart
capability on a GR Restarter.
Configuring the IETF standard OSPF GR Restarter
Follow these steps to configure the standard IETF OSPF GR Restarter:
To do...
Enter system view
Enable OSPF and
enter its view
Enable opaque LSA
advertisement
capability
Use the command...
snmp-agent trap enable ospf
[ process-id ] [ ifauthfail | ifcfgerror |
ifrxbadpkt | ifstatechange |
iftxretransmit |
lsdbapproachoverflow |
lsdboverflow | maxagelsa |
nbrstatechange | originatelsa |
vifcfgerror | virifauthfail |
virifrxbadpkt | virifstatechange |
viriftxretransmit |
virnbrstatechange ] *
ospf [ process-id | router-id router-id |
vpn-instance instance-name ]*
enable log [ config | error | state ]
Use the command...
system-view
ospf [ process-id | router-id
router-id | vpn-instance
instance-name ] *
opaque-capability enable
Use the command...
system-view
ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
opaque-capability enable
Remarks
Optional
Enabled by default
-
Optional
Not enabled by default
Remarks
-
-
Optional
Disabled by default
Remarks
-
Required
Disabled by default
Required
Disabled by default