Configuring An Address Pool For The Dhcp Server; Configuration Task List; Creating A Dhcp Address Pool; Configuring An Address Allocation Mechanism - 3Com MSR 50 Series Configuration Manual

576 C 33: DHCP S
HAPTER
Configuring an
Address Pool for the
DHCP Server

Configuration Task List

Creating a DHCP
Address Pool
Configuring an Address
Allocation Mechanism
C
ERVER ONFIGURATION
To configure an address pool, perform the tasks described in the following
sections:
Task
"Creating a DHCP Address Pool" on page 576
"Configuring an Address
Allocation Mechanism" on
page 576
"Configuring a Domain Name Suffix for the Client" on page
578
"Configuring DNS Servers for the Client" on page 578
"Configuring WINS Servers and NetBIOS Node Type for the
Client" on page 579
"Configuring the BIMS server Information for the Client" on
page 579
"Configuring Gateways for the Client" on page 580
"Configuring Option 184 Parameters for the Client with Voice
Service" on page 580
"Configuring the TFTP Server and Bootfile Name for the
Client" on page 581
"Configuring Self-Defined DHCP Options" on page 581
To create a DHCP address pool, use the following commands:
To do...
Enter system view
Create a DHCP address pool
and enter its view
c
CAUTION: You can configure either the static binding or dynamic address
allocation for an address pool as needed.
It is required to specify an address range for the dynamic address allocation. A
static binding is a special address pool containing only one IP address.
Configuring manual address allocation
Some DHCP clients such as a WWW server need fixed IP addresses. You can create
a static binding of a client's MAC or ID to IP address in the DHCP address pool.
"Configuring manual address
allocation" on page 576
"Configuring dynamic
address allocation" on page
577
Use the command...
system-view
dhcp server ip-pool
pool-name
Remarks
Required
Required to configure either
of the two
Optional
Remarks
-
Required
No DHCP address pool is
created by default.