3Com MSR 50 Series Configuration Manual page 764

764 C 51: T
HAPTER ERMINAL
A C
CCESS ONFIGURATION
To do...
Enter system view
Configure the global
source IP address for
TCP connections
Enter terminal template
view
Configure the
automatic link
teardown time
Bind a VPN instance to
the template
Enable terminal data
read blocking
Configure the terminal
data send delay
Configure the router
not to clear the terminal
buffer after a TCP
connection is
established
Configure the terminal
buffer size
Configure the TCP
connection idle timeout
time
Configure to print
terminal connection
information on the
terminal
Configure the router to
print information on the
terminal
Configure the language
of the print information
Configure the
maximum size of data
to be sent to a terminal
at one time
Configure the terminal
send buffer threshold
Configure TCP
parameters
Use the command...
system-view
rta source-ip ip-address
rta template
template-name
auto-close time
bind vpn-instance
vpn-name
data read block
data send delay
milliseconds
driverbuf save
driverbuf size number
idle-timeout seconds
print connection-info
print information
print language { chinese |
english }
sendbuf bufsize size
sendbuf threshold value
tcp { recvbuf-size recvsize |
sendbuf-size sendsize |
nodelay | keepalive time
count }
Remarks
-
Optional
Not configured by default
-
Optional
0 seconds by default; that is, no
automatic link teardown is performed.
Optional
Not configured by default
Optional
Disabled by default
Optional
0 milliseconds by default; that is, there
is no send delay.
Optional
By default, the router clears the
terminal receive buffer after a TCP
connection is established.
Optional
8 KB by default
Optional
0 seconds by default; that is, the
connection never times out.
Optional
By default, terminal connection
information is printed on the terminal.
Use the print menu command before
using this command
Optional
By default, the router prints
information on the terminal
Optional
Chinese by default
Optional
500 bytes by default
Optional
Not configured by default
Optional
By default, receive buffer size is 2,048
bytes, send buffer size is 2,048 bytes,
delay is enabled, keepalive interval is
50 seconds, and the number of times
for sending a keepalive is 3.