3Com MSR 50 Series Configuration Manual page 751

To do...
Configure the automatic
link establishment time
Bind a VPN instance
Enable data encryption
Enable terminal data read
blocking
Configure the terminal
data send delay
Configure the router not
to clear the terminal
receive buffer after the
TCP connection is
established
Configure the terminal
receive buffer size
Configure the TCP
connection idle timeout
time
Configure the menu
hotkey
Configure a screen code
for the menu screen
Configure the language of
the print information
Enable the router to print
information on the
terminal
Configure to print terminal
connection information on
the terminal
Enable to print menu on
the terminal
TTY Terminal Access Configuration
Use the command...
auto-link time
bind vpn-instance
vpn-name
data protect router-unix
data read block
data send delay
milliseconds
driverbuf save
driverbuf size size
idle-timeout seconds
menu hotkey
ascii-code&<1-3>
menu screencode string
print language { chinese |
english }
print information
print connection-info
print menu
Remarks
Optional
0 seconds by default; that is, no
automatic link establishment is
performed.
Optional
Not configured by default
Optional
By default, data encryption is
disabled between the router and
the Unix FEP.
Optional
Disabled by default
Optional
0 milliseconds by default; that is,
there is no send delay.
Optional
By default, the router clears the
terminal receive buffer after the
TCP connection is established.
Optional
8 KB by default
Optional
0 seconds by default; that is, the
connection never times out.
Optional
Not configured by default
Use the print menu command
before using this command.
Optional
Not configured by default
Use the print menu command
before using this command.
Optional
Chinese by default
Optional
Enabled by default
Optional
By default, terminal connection
information is printed on the
terminal.
Use the print menu command
before using this command
Optional
Enabled by default.
Use the print information
command before using this
command
751