3Com MSR 50 Series Configuration Manual page 977

Configure the interface behavior
Follow these steps to configure the interface behavior:
To do...
Enter system view
Enter RIP view
Disable an or all interfaces
from sending routing updates
(the interfaces can still receive
updates)
Return to system view
Enter interface view
Enable the interface to receive
RIP messages
Enable the interface to send
RIP messages
Configure a RIP version
You can configure a RIP version in RIP or interface view.
If neither global nor interface RIP version is configured, the interface sends
■
RIP-1 broadcasts and can receive RIP-1 broadcast and unicast packets, RIP-2
broadcast, multicast, and unicast packets.
If an interface has no RIP version configured, it uses the global RIP version;
■
otherwise it uses the RIP version configured on it.
With RIP-1 configured, an interface sends RIP-1 broadcasts, and can receive
■
RIP-1 broadcasts and RIP-1 unicasts.
With RIP-2 configured, a multicast interface sends RIP-2 multicasts and can
■
receive RIP-2 unicasts, broadcasts and multicasts.
With RIP-2 configured, a broadcast interface sends RIP-2 broadcasts and can
■
receive RIP-1 unicasts, and broadcasts, RIP-2 broadcasts, multicasts and
unicasts.
Follow these steps to configure a RIP version:
To do...
Enter system view
Enter RIP view
Use the command...
system-view
rip [ process-id ]
[ vpn-instance
vpn-instance-name ]
silent-interface { all |
interface-type
interface-number }
quit
interface interface-type
interface-number
rip input
rip output
Use the command...
system-view
rip [ process-id ]
[ vpn-instance
vpn-instance-name ]
Configuring RIP Basic Functions
Remarks
--
--
Optional
All interfaces can send routing
updates by default
-
-
Optional
Enabled by default
Optional
Enabled by default
Remarks
--
--
977