3Com MSR 50 Series Configuration Manual page 766

766 C 51: T
HAPTER ERMINAL
A C
CCESS ONFIGURATION
Network diagram
Figure 226 Network diagram for asynchronous RTC terminal access configuration
Configuration procedure
1 Configure the RTC server.
# Enable terminal access.
<Sysname> system-view
[Sysname] rta server enable
# Set the listening port of the server.
[Sysname] rta rtc-server listen-port 9000
# Create a terminal access template and enter its view.
[Sysname] rta template rtcserver
# Configure the VTY.
[Sysname-rta-template-rtcserver] vty 0 rtc-server remote 10.111.0.12
1
[Sysname-rta-template-rtcserver] vty 0 password simple 123
# Apply the template to the interface.
[Sysname-rta-template-rtcserver] quit
[Sysname] interface async 1/0
[Sysname-Async1/0] async mode flow
[Sysname-Async1/0] rta terminal rtcserver 1
2 Configure the RTC client.
# Enable terminal access.
<Sysname> system-view
[Sysname] rta server enable
# Create a terminal access template and enter its view.
[Sysname] rta template rtcclient
# Configure the VTY.