Configuring The Sliding Window Size On The Pri Interface; Configuring Statistics About Isdn Message Receiving/Sending; Configuring To Check The Calling Number When An Incoming Call Comes - 3Com MSR 50 Series Configuration Manual

Configuring the Sliding
Window Size on the PRI
Interface
Configuring Statistics
About ISDN Message
Receiving/Sending
Configuring to Check
the Calling Number
When an Incoming Call
Comes
To do...
Configure ISDN B channel
ascending or descending
selection mode
Follow these steps to configure the size of the sliding window on the PRI interface:
To do...
Enter system view
Enter specified interface view
Configure the sliding window
size on the PRI interface or
restore the default.
Follow these steps to configure the statistics about ISDN message
receiving/sending:
To do...
Enter system view
Enter specified interface view
Set ISDN to start the statistics of
message receiving/sending
Set ISDN to stop the statistics of
message receiving/sending
Display ISDN statistics
Set ISDN to continue the statistics
of information received by ISDN
Clear ISDN statistics
Follow these steps to configure to check the calling number when an incoming
call comes:
To do...
Enter system view
Enter specified interface view
Configure to check the calling
number when an incoming
call comes
Use the command...
isdn bch-select-way
{ ascending | descending }
Use the command...
system-view
interface interface-type
interface-number
isdn pri-slipwnd-size
{ window-size | default }
Use the command...
system-view
interface interface-type
interface-number
isdn statistics start
isdn statistics stop
isdn statistics display [ flow ]
isdn statistics continue
isdn statistics clear
Use the command...
system-view
interface interface-type
interface-number
isdn caller-number
caller-number
Configuring ISDN
Remarks
Optional
ISDN B channel ascending selection
mode is adopted by default. When
the switch manages B channel, this
command takes no effect. (For
more information about
configuring local management
ISDN B channel, refer to "ISDN
Configuration" on page 421).
Remarks
-
-
Optional
The sliding window on the PRI
interface defaults to 7.
Remarks
-
-
Required
Required
Required
Optional
Optional
Remarks
-
-
Required
Execute this command to
configure limited incoming
calls.
431