Configuring Traffic Statistics Interval; Displaying And Maintaining Dcc; Dcc Configuration Example - 3Com MSR 50 Series Configuration Manual

3com msr 30-16: software guide
Hide thumbs Also See for MSR 50 Series:
Table of Contents

Advertisement

Configuring Traffic
Statistics Interval
Displaying and
Maintaining DCC
DCC Configuration
Example
Configuration procedure
Follow these steps to configure DCC timers and buffer queue length on a dial
interface:
To do...
Enter system view
Enter dial interface (physical
or dialer) view
Set the link idle-timeout timer dialer timer idle seconds
Set the holddown timer
Set the compete-idle timer
Set the wait-carrier timer
Set the buffer queue length
Follow these steps to configure traffic statistics interval for DCC:
To do...
Enter system view
Set the traffic statistics interval
for DCC
To do...
Display information about
specified or all dial interfaces
Display information about a
dialer interface
Tear down dialup links
This section provides these examples:
"C-DCC Application" on page 180
"RS-DCC Application" on page 182
"DCC Application on ISDN" on page 186
"RS-DCC Application with MP" on page 190
"DCC for Dialup ISDN BRI Line and Leased Line Connection" on page 192
"Router-to-Router Callback with DCC (PPP Approach)" on page 194
"Router-to-Router Callback with DCC (ISDN Approach)" on page 197

Displaying and Maintaining DCC

Use the command...
system-view
interface interface-type
interface-number
dialer timer enable seconds Optional
dialer timer compete
seconds
dialer timer wait-carrier
seconds
dialer queue-length packets Optional
Use the command...
system-view
dialer flow-interval interval
Use the command...
display dialer [ interface interface-type
interface-number ]
display interface dialer [ number ]
dialer disconnect [ interface
interface-type interface-number ]
179
Remarks
--
--
Optional
The default is 120 seconds.
The default is 5 seconds.
Optional
The default is 20 seconds.
Optional
The default is 60 seconds.
Packets are not buffered by
default.
Remarks
--
Optional
The default is 20 seconds.
Remarks
Available in any
view
Available in any
view
Available in any
view

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents