3Com MSR 50 Series Configuration Manual page 598

598 C 34: DHCP R
HAPTER
A C
ELAY GENT ONFIGURATION
Analysis
Some problems may occur with the DHCP relay agent or server configuration.
Enable debugging and execute the display command on the DHCP relay agent to
view the debugging information and interface state information for locating the
problem.
Solution
Check that:
The DHCP is enabled on the DHCP server and relay agent.
■
The address pool on the same subnet where DHCP clients reside is available on
■
the DHCP server.
The routes between the DHCP server and DHCP relay agent are reachable.
■
The relay agent interface connected to DHCP clients is correlated with correct
■
DHCP server group and IP addresses for the group members are correct.