Is-Is Gr Configuration Example - 3Com MSR 50 Series Configuration Manual

n
IS-IS GR Configuration
Example
Id IPV4.State
001 Up
After the DIS priority configuration, you can see Router A is the DIS for Level-1-2,
and the pseudonode is 0000.0000.0001.01.
# Display information about IS-IS neighbors and interfaces of Router C.
[RouterC] display isis peer
System Id: 0000.0000.0001
Interface: Ethernet1/0
State: Up HoldTime: 7s
System Id: 0000.0000.0002
Interface: Ethernet1/0
State: Up HoldTime: 23s
[RouterC] display isis interface
Interface: Ethernet1/0
Id IPV4.State
001 Up
# Display information about IS-IS neighbors and interfaces of Router D.
[RouterD] display isis peer
System Id: 0000.0000.0001
Interface: Ethernet1/0
State: Up HoldTime: 7s
System Id: 0000.0000.0002
Interface: Ethernet1/0
State: Up HoldTime: 26s
[RouterD] display isis interface
Interface: Ethernet1/0
Id IPV4.State
001 Up
Network requirements
Router A, Router B, and Router C belong to the same IS-IS routing domain, as
illustrated in Figure 268.
IS-IS Configuration Example
IPV6.State MTU
Down 1497
Peer information for ISIS(1)
----------------------------
Circuit Id: 0000.0000.0001.01
Type: L1
Circuit Id: 0000.0000.0001.01
Type: L1
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Peer information for ISIS(1)
----------------------------
Circuit Id: 0000.0000.0001.01
Type: L2
Circuit Id: 0000.0000.0001.01
Type: L2
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Type DIS
L1/L2 Yes/Yes
PRI: 100
PRI: 6
MTU Type DIS
1497 L1/L2 No/No
PRI: 100
PRI: 64
MTU Type DIS
1497 L1/L2 No/No
913