3Com MSR 50 Series Configuration Manual page 850

850 C 56: BGP C
HAPTER ONFIGURATION
To do...
Configure BGP Configure
timers keepalive
interval and
holdtime
Configure
keepalive
interval and
holdtime for a
peer/peer group
Configure the interval for sending
the same update to a peer/peer
group
Configure BGP Disable BGP
soft reset route-refresh
and
multi-protocol
extensions for a
peer/peer group
Enable BGP
route refresh for
a peer/peer
group
Keep all original
routes imported
from a
peer/peer group
regardless of
whether they
pass the
inbound
filtering policy
Return to user
view
Perform manual
soft reset on
BGP
connections
Enter system
view
Enter BGP view
Clear the direct EBGP session on
any interface that becomes down
Perform MD5 authentication
when establishing a TCP
connection
Configure the number of BGP load
balanced routes
Use the command...
timer keepalive
keepalive hold holdtime
peer { group-name |
ip-address } timer
keepalive keepalive
hold holdtime
peer { group-name |
ip-address }
route-update-interval
seconds
peer { group-name |
ip-address }
capability-advertise
conventional
peer { group-name |
ip-address }
capability-advertise
route-refresh
peer { group-name |
ip-address }
keep-all-routes
return
refresh bgp { all |
ip-address | group
group-name | external |
internal } { export |
import }
system-view
bgp as-number
ebgp-interface-sensiti
ve
peer { group-name |
ip-address } password
{ cipher | simple }
password
balance number
Remarks
Optional
The keepalive interval defaults
to 60 seconds, holdtime
defaults to 180 seconds.
Optional
The intervals for sending the
same update to an IBGP peer
and an EBGP peer default to
15 seconds and 30 seconds
respectively.
Optional
Enabled by default
Optional
Enabled by default
Optional
Not kept by default
-
Required
-
-
Optional
The function is enabled by
default
Optional
Not performed by default
Optional
Load balancing is not enabled
by default.