Configuration Task List - 3Com MSR 50 Series Configuration Manual

458 C 23: MSTP C
HAPTER
Configuration Task
List
ONFIGURATION
Before configuration, you need to know the position of each device in each MST
instance: root bridge or leave node. In each instance, one, and only one device
acts as the root bridge, while all others as leaf nodes.
Task
"Configuring the Root
Bridge" on page 459
"Configuring an MST Region"
on page 459
"Specifying the Root Bridge or a
Secondary Root Bridge" on page
460
"Configuring the Work Mode of
MSTP Device" on page 462
"Configuring the Priority of the
Current Device" on page 462
"Configuring the Maximum
Hops of an MST Region" on
page 463
"Configuring the Network
Diameter of a Switched
Network" on page 464
"Configuring Timers of MSTP"
on page 464
"Configuring the Timeout
Factor" on page 465
"Configuring the Maximum
Transmission Rate of Ports" on
page 466
"Configuring Ports as Edge
Ports" on page 467
"Configuring Whether Ports
Connect to Point-to-Point Links"
on page 467
"Configuring the Mode a Port
Uses to Recognize/Send MSTP
Packets" on page 468
"Enabling the Output of Port
State Transition Information" on
page 469
"Enabling the MSTP Feature" on
page 469
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Required