[RouterA] domain system
[RouterA-isp-system] authentication ppp local
2 Configure Router B:
# Add a user for Router A
<RouterB> system-view
[RouterB] local-user router-a
[RouterB-luser-router-a] password simple router-a
[RouterB-luser-router-a] quit
# Specify the virtual-template for this user and perform PPP negotiation by using
the NCP information of this template
[RouterB] ppp mp user router-a bind virtual-template 1
# Configure operating parameters of the virtual-template
[RouterB] interface virtual-template 1
[RouterB-Virtual-Template1] ip address 202.38.166.2 255.255.255.0
[RouterB-Virtual-Template1] quit
# Assign interfaces Serial 2/0:1 and Serial 2/0/:2 to the MP channel, taking Serial
2/0:1 for an example.
[RouterB] interface serial 2/0:1
[RouterB-Serial2/0:1] ppp mp
[RouterB-Serial2/0:1] ppp authentication-mode pap domain system
[RouterB-Serial2/0:1] ppp pap local-user router-b password simple router-b
3 Configure Router C:
# Add a user for Router A
<RouterC> system-view
[RouterC] local-user router-a
[RouterC-luser-router-a] password simple router-a
[RouterC-luser-router-a] quit
# Specify a virtual-template for this user and the NCP information of the template
will be used for PPP negotiation.
[RouterC] ppp mp user router-a bind virtual-template 1
# Configure operating parameters of the virtual-template
[RouterC] interface virtual-template 1
[RouterC-Virtual-Template1] ip address 202.38.168.2 255.255.255.0
[RouterC-Virtual-Template1] quit
# Assign interfaces Serial 2/0:1 and Serial 2/0:2 to the MP channel, taking Serial
2/0:1 for an example.
[RouterC] interface serial 2/0:1
[RouterC-Serial2/0:1] ppp mp
[RouterC-Serial2/0:1] ppp authentication-mode pap domain system
[RouterC-Serial2/0:1] ppp pap local-user router-c password simple router-c
[RouterC-Serial2/0:1] quit
PPP and MP Configuration Example
383