3Com MSR 50 Series Configuration Manual page 206

206 C 6: DCC C
HAPTER ONFIGURATION
the Make New Connection icon; and in the popup menu select the New
Connection...option. The [Network Connection Wizard] window appears. Click
<Next>.
# In the [Network Connection Type] dialog, select the Dial-up to the Internet
option, and click <Next>. The [Internet Connection Wizard] dialog appears. Select
to set up the Internet connection manually. Click <Next>.
# In the [Setting up your Internet connection] dialog box, select the I connect
through a phone line and a modem option. Click <Next> to set Internet
account connection information.
# Type in the phone number for dialing to the callback server. Click <Next>.
# Type in the username (user16 for example) and password (user16 for example)
that you want to use for PPP authentication when connecting to the server. Click
<Next>.
# Assign a name to your new connection and follow the instruction to complete
the connection setup.
# In the [Network and Dial-up Connections] window, right-click on the connection
just created, and in the popup menu select the Properties option.
# In the properties setting dialog, select the [Networking] tab. In the Type of
dial-up server I am calling drop-down list, select PPP: Windows 95/98/NT4/2000,
Internet. Click <Settings> to do the following:
Select the Enable LCP extensions check box.
■
Unselect the Enable software compression check box.
■
Unselect the Negotiate multi-link for single link connections check box.
■
Click <OK>.
# Turn to the [ Network and Dial-up Connections] window. Click on the
connection icon you just created. Then, from the menu bar, select
[Advanced/Dial-up Preferences...]. In the [Dial-up Preferences] dialog, select the
No callback option under the [Callback] tab.
Double-click the created connection to dial.
Solution 2: On Router C on the dialup side configure a single dial string. On Router
D on the access side, use C-DCC approach to set up connection with Router C
through an ISDN PRI interface; configure DCC parameters on a dialer interface.
4 Configure Router C
# Configure a dial access control rule for dialer access group 1; create a local user
account userd for Router D and configure PPP authentication for the account.
<RouterC> system-view
[RouterC] dialer-rule 1 ip permit
[RouterC] local-user userd
[RouterC-luser-userd] password simple user1