3Com MSR 50 Series Configuration Manual page 761

3com msr 30-16: software guide
Hide thumbs Also See for MSR 50 Series:
Table of Contents

Advertisement

To do...
Use the command...
Enter system view
system-view
Configure the global
rta source-ip ip-address
source IP address for
TCP connections
Enter terminal
rta template
template view
template-name
Configure the
auto-close time
automatic link
teardown time
Configure the
auto-link time
automatic link
establishment time
Bind a VPN instance to
bind vpn-instance
the template
vpn-name
Enable terminal data
data read block
read blocking
Configure the data
data send delay
send delay
milliseconds
Configure the router
driverbuf save
not to clear the
terminal buffer after a
TCP connection is
established
Configure the terminal
driverbuf size size
receive buffer size
Configure the TCP
idle-timeout seconds
connection idle
timeout time
Configure to print
print connection-info
terminal connection
information on the
terminal
Configure the router to
print information
print information on
the terminal
Configure the
print language { chinese |
language of the print
english }
information
Set the terminal reset
resetkey ascii-code&<1-3>
hotkey
Configure the
sendbuf bufsize size
maximum size of data
sent by the terminal
send buffer at one
time
RTC Terminal Access Configuration
Remarks
-
Optional
Not configured by default
-
Optional
0 seconds by default; that is, no
automatic link teardown is performed.
Optional
0 seconds by default; that is, no
automatic link establishment is
performed.
Optional
Not configured by default
Optional
Disabled by default
Optional
0 milliseconds by default; that is, there
is no send delay.
Optional
By default, the router clears the
terminal receive buffer after a TCP
connection is established.
Optional
8,192 bytes by default
Optional
0 seconds by default; that is, the
connection never times out.
Optional
By default, terminal connection
information is printed on the terminal.
Use the print information command
before using this command
Optional
By default, the router prints
information on the terminal
Optional
Chinese by default
Optional
Not configured by default
Optional
500 bytes by default
761

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents