Configuring The Local Device To Authenticate The Peer Using Pap; Configuring The Local Device To Authenticate The Peer Using Chap - 3Com MSR 50 Series Configuration Manual

368 C 19: PPP
HAPTER AND
n
Configuring the Local
Device to Authenticate
the Peer Using PAP
n
Configuring the Local
Device to Authenticate
the Peer Using CHAP
MP C
ONFIGURATION
This chapter only discusses local authentication. For information about the remote
AAA authentication, refer to
1751.
Follow these steps to configure the local device to authenticate the peer using
PAP:
To do...
Enter system view
Enter the specified interface
view
Configure the local device to
authenticate the peer using
PAP
Exit to system view
Create local user, and enter
local user view
Configure a password for the
local user
Configure service type of the
local user as well as other
attributes
Exit to system view
Create an ISP domain, or
enter an existing ISP domain
view
Configure domain user to use
local authentication scheme
For detailed description on how to create a local user and configure its attributes,
and how to create a domain and configure its attributes, refer to
Local User Attributes" on page
Follow these steps to configure the local device to authenticate the peer using
CHAP:
To do...
Enter system view
Enter the specified interface
view
"AAA/RADIUS/HWTACACS Configuration" on page
Use the command...
system-view
interface interface-type
interface-number
ppp authentication-mode
pap [ [ call-in ] domain
isp-name ]
quit
local-user username
password { cipher | simple }
password
service-type ppp
[ callback-nocheck |
callback-number
callback-number |
call-number call-number
[ :subcall-number ] ]
quit
domain { isp-name | default
{ disable | enable
isp-name } }
authentication ppp local
1767.
Use the command...
system-view
interface interface-type
interface-number
Remarks
-
-
Required
If this command is used
without specifying the
domain keyword, the
system-default domain named
"system" will be used. The
authentication mode is local
authentication and the
address pool for address
allocation must be the one
configured for this domain
-
Required
Required
Required
-
Optional
Optional
"Configuring
Remarks
-
-