3Com MSR 50 Series Configuration Manual page 677

ND router advertisements are sent every 600 seconds
ND router advertisements live for 1800 seconds
Hosts use stateless autoconfig for addresses
# Display the IPv6 information of the interface on Router B.
[RouterB-Ethernet1/0] display ipv6 interface ethernet 1/0
Ethernet1/0 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::20F:E2FF:FE00:2
Global unicast address(es):
2001::20F:E2FF:FE00:2, subnet is 2001::/64
3001::2, subnet is 3001::/64
4001::20F:E2FF:FE00:2, subnet is 4001::/64 [AUTOCFG]
[valid lifetime 4641s/preferred lifetime 4637s]
Joined group address(es):
FF02::1:FF00:0
FF02::1:FF00:2
FF02::2
FF02::1
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
# From Router A, ping the link-local address, EUI-64 address, aggregatable global
unicast address, and automatically generated address of Router B. If the
configurations are correct, the above four types of IPv6 addresses can be pinged.
c
CAUTION: When you ping a link-local address, you should use the "-i" parameter
to specify an interface for the link-local address.
<RouterA-Ethernet1/0> ping ipv6 FE80::20F:E2FF:FE00:2 -i ethernet 1/0
PING FE80::20F:E2FF:FE00:2 : 56
Reply from FE80::20F:E2FF:FE00:2
bytes=56 Sequence=1 hop limit=64
Reply from FE80::20F:E2FF:FE00:2
bytes=56 Sequence=2 hop limit=64
Reply from FE80::20F:E2FF:FE00:2
bytes=56 Sequence=3 hop limit=64
Reply from FE80::20F:E2FF:FE00:2
bytes=56 Sequence=4 hop limit=64
Reply from FE80::20F:E2FF:FE00:2
bytes=56 Sequence=5 hop limit=64
--- FE80::20F:E2FF:FE00:2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/2/4 ms
<RouterA-Ethernet1/0> ping ipv6 2001::20F:E2FF:FE00:2
PING 2001::20F:E2FF:FE00:2 : 56
Reply from 2001::20F:E2FF:FE00:2
bytes=56 Sequence=1 hop limit=64
Reply from 2001::20F:E2FF:FE00:2
bytes=56 Sequence=2 hop limit=64
Reply from 2001::20F:E2FF:FE00:2
bytes=56 Sequence=3 hop limit=64
Reply from 2001::20F:E2FF:FE00:2
bytes=56 Sequence=4 hop limit=64
Reply from 2001::20F:E2FF:FE00:2
bytes=56 Sequence=5 hop limit=64
IPv6 Configuration Example
data bytes, press CTRL_C to break
time = 4 ms
time = 2 ms
time = 2 ms
time = 2 ms
time = 2 ms
data bytes, press CTRL_C to break
time = 4 ms
time = 2 ms
time = 2 ms
time = 3 ms
time = 2 ms
677