3Com MSR 50 Series Configuration Manual page 375

To do...
Enter system view
Create and enter VT
interface
Exit to system view
Associate a Associate a
physical physical
interface or interface
a username with the
with the VT virtual
interface template
interface
(use either
method)
Associate a
username
with the VT
interface
Configure other optional
parameters
Configuring other optional parameters
Follow these steps to configure other optional parameters:
To do...
Enter system view
Create and enter MP VT
interface or dialer interface
view
Specify the binding mode on
VT interface
Configure the maximum
number of links in MP bundle
Use the command...
system-view
interface virtual-template
number
quit
interface interface-type
interface-number
ppp mp virtual-template
number
Refer to "Configuring PPP" on
page 367
ppp mp user username bind
virtual-template number
interface interface-type
interface-number
ppp mp
Refer to "Configuring PPP" on
page 367
Refer to "Configuring other
optional parameters" on page
375
Use the command...
system-view
interface virtual-template
number
interface dialer number
ppp mp binding-mode
{ authentication | both |
descriptor }
ppp mp max-bind
max-bind-num
Configuring MP
Remarks
-
Required
-
-
Required
Specify the number of VT
interface to be bundled on the
interface
Optional
PPP authentication has no
effect on the setup of MP
Required
Associate VT interface with MP
users
-
Required
Configure the interface
encapsulated with PPP to work
in MP mode
Required
Optional
Remarks
-
Required
Optional
By default, MP binding is
based on both the PPP
authentication username and
the descriptor.
Optional
16 by default
This command is available in
VT interface view and dialer
interface view.
375