3Com MSR 50 Series Configuration Manual page 757

To do...
Configure the router to
print information on
the terminal
Configure the router to
print the menu
Configure the
language of the print
information
Set the terminal reset
hotkey
Configure the
maximum size of data
to be sent at one time
Configure the terminal
send buffer threshold
Set the terminal
connectivity test
hotkey
Configure TCP
parameters
Configure a
description for a VTY
Configure a screen
code for a VTY screen
Configure the VTY
switching hotkey
Update the
configuration
n
If both the global source IP address and the source IP address of a VTY are
■
configured, the one of the VTY is used.
The parameters for TCP connections must be configured before the TCP
■
connections are established. If you configure the parameters after a TCP
connection is established, the TCP connection must be reestablished for the
parameters to take effect. Pressing the reset hotkey on the terminal can
reestablish the TCP connection.
The receive buffer size must be configured before the terminal template is
■
applied. If you configure the receive buffer size after a terminal template is
applied, you need to remove the application of the terminal template and
apply the terminal template again for the receive buffer size to take effect.
Telnet Terminal Access Configuration
Use the command...
print information
print menu
print language { chinese |
english }
resetkey ascii-code&<1-3>
sendbuf bufsize size
sendbuf threshold value
testkey ascii-code&<1-3>
tcp { recvbuf-size recvsize |
sendbuf-size sendsize |
nodelay | keepalive time
count }
vty vty-number description
string
vty vty-number screencode
string
vty vty-number hotkey
ascii-code&<1-3>
update changed-config
Remarks
Optional
By default, the router prints
information on the terminal
Optional
By default, the menu is printed on
the terminal.
Use the print information
command before using this
command
Optional
Chinese by default
Optional
Not configured by default
Optional
500 bytes by default
Optional
Not configured by default
Optional
Not configured by default
Optional
By default, receive buffer size is
2,048 bytes, send buffer size is
2,048 bytes, delay is enabled,
keepalive interval is 50 seconds, and
the number of times for sending a
keepalive is 3.
Optional
Not configured by default.
Optional
Not configured by default
Optional
Not configured by default
Optional
757