3Com MSR 50 Series Configuration Manual page 388

388 C 19: PPP
HAPTER AND
MP C
ONFIGURATION
# Create a virtual-template and configure the IP address
[RouterB] interface virtual-template 1
[RouterB-Virtual-Template1] ip address 8.1.1.2 24
[RouterB-Virtual-Template1] ppp mp binding authentication
[RouterB-Virtual-Template1] quit
# Configure Serial 2/1.
[RouterB] interface serial 2/1
[RouterB-Serial2/1] link-protocol ppp
[RouterB-Serial2/1] ppp authentication-mode pap domain system
[RouterB-Serial2/1] ppp pap local-user rtb password simple rtb
[RouterB-Serial2/1] ppp mp
[RouterB-Serial2/1] shutdown
[RouterB-Serial2/1] undo shutdown
[RouterB-Serial2/1] quit
# Configure Serial 2/0.
[RouterB] interface serial 2/0
[RouterB-Serial2/0] link-protocol ppp
[RouterB-Serial2/0] ppp authentication-mode pap domain system
[RouterB-Serial2/0] ppp pap local-user rtb password simple rtb
[RouterB-Serial2/0] ppp mp
[RouterB-Serial2/0] shutdown
[RouterB-Serial2/0] undo shutdown
[RouterB-Serial2/0] quit
# Apply user authentication to domain users.
[RouterB] domain system
[RouterB-isp-system] authentication ppp local
[RouterB-isp-system] quit
Verify the results on Router A:
<RouterA> display ppp mp
Template is Virtual-Template1
Bundle rtb, 2 member, Master link is Virtual-Template1:0
0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved,
sequence 0/0 rcvd/sent
The bundled member channels are:
Serial2/1
Serial2/0
Verify the results on Router B:
[RouterB] display ppp mp
Template is Virtual-Template1
Bundle rta, 2 member, Master link is Virtual-Template1:0
0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved,
sequence 0/0 rcvd/sent
The bundled member channels are:
Serial2/1
Serial2/0