Clear Dap Boot-Configuration; Clear Radio-Profile - 3Com WX4400 Command Reference Manual

clear dap
boot-configuration

clear radio-profile

Removes the static IP address configuration for a Distributed MAP.
Syntax —
clear dap boot-configuration dap-num
dap-num — Number of the Distributed MAP for which you are
dap
clearing static IP information.
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.2.
Usage — When the static IP configuration is cleared for a Distributed
MAP, the next time the Distributed MAP is rebooted, it uses the standard
boot process.
Examples — The following command clears the static IP address
configuration for Distributed MAP 1.
WX4400# clear dap 1 boot-configuration
This will clear specified DAP devices. Would you like to
continue? (y/n) [n]y
success: change accepted.
set dap boot-ip on page 346
set dap boot-switch on page 347
set dap boot-vlan on page 349
display dap boot-configuration on page 321
Removes a radio profile or resets one of the profile's parameters to its
default value.
Syntax —
clear radio-profile name [parameter]
— Radio profile name.
name
— Radio profile parameter:
parameter
beacon-interval
countermeasures
dtim-interval
frag-threshold

clear dap boot-configuration

293