Setting The Parameters Of The Console Terminal - 3Com 3C13755-US - Router 5642 Installation Manual

68 C 5: B
HAPTER OOTING AND
Setting the
Parameters of the
Console Terminal
C R
ONFIGURING THE OUTER
To set terminal parameters:
1 Start the PC and select Start > Programs > Accessories > Communications >
HyperTerminal.
The HyperTerminal window displays the Connection Description dialog box, as
shown below.
Figure 71 Connection Description Dialog Box
2 Enter the name of the new connection in the Name field and click OK. The
Connect To dialog box, shown below displays.
Figure 72 Connect To Dialog Box
3 Select the serial port for the connection from the Connect using dropdown menu
and click OK. The Connection Properties dialog box, shown below displays.