Table of Contents
Advertisement
MER Mode
Figure 18 MER screen
MER mode is used in business environment where static IP address
and subnet are assigned by your ISP. Choose MER and click Next.
To setup the Firewall Router for use with a MER connection, use the
following procedure:
Obtain an IP address automatically: Click this button to make the
system get an IP address automatically.
Manually entering an IP address: To set WAN IP address by yourself.
1 WAN IP Address: Enter the IP address for using in the WAN from your
ISP.
2 WAN Subnet Mask: Enter the WAN subnet mask.
3 Default Gateway: Enter the default gateway for using in the WAN from
your ISP.
4 Enter your primary DNS address in the Primary DNS Address text box.
5 Enter your secondary DNS address in the Secondary DNS Address
text box.
6 Check all of your settings, and then click Next or back to go back to the
pervious screen.
Accessing the Wizard
37
Advertisement
Table of Contents
