4 Fax
Priority Send / Delayed Start (Specifying Send Priority/Send Time)
If you set the send priority, you can send faxes prior to stored documents or use the
polling feature.
Note
You can give priority to a pending job. For more information, refer to "Checking Current/Pending Jobs"
(P.371).
You can specify a send time for a fax using the Delayed Start feature. It is useful for
sending fax when communication charges are low, such as midnight.
Important • If a power failure occurs or the power is turned off when the Delayed Start feature is set, the
Note
4
1
Select [Priority Send / Delayed
Start] on the [Send Options]
screen.
2
Select [On] of [Priority Send] to set
Priority Send, and select [On] of
[Delayed Start] to set Delayed
Start.
Priority Send
Delayed Start
Start Time
Displays the [Delayed Start - Start Time] screen.
Refer to "[Delayed Start - Start Time] Screen" (P.127).
126
• This feature is unavailable for iFax.
• If the Priority Send feature is selected during transmission, the fax will be sent after the
current transmission ends.
• [Priority Send] can be set in combination with [Delayed Start]. If both features are set,
Priority Send is performed at the set time.
• In redial mode, the fax will be resent preferentially after the set redial interval.
• The Priority Send feature cannot be set separately for each recipient of Broadcast and multi-
polling jobs.
setting is cleared and transmission begins as soon as the power is turned on.
• You can specify a time within 24 hours in 1 minute increments. You cannot specify a date.
• You can set [Delayed Start] separately for each address number. For information on how to
register address numbers, refer to "Address Book (Address Number)" (P.347).
• If address number or group dial numbers are dialed with the Broadcast Send feature, the
Delayed Start setting specified for each address number is invalid.
• If the fax cannot be sent at the specified time because, for example, the telephone line is
busy, it will be sent as soon as the line becomes available.
• The default value of [Start Time] can be changed in the System Administration mode. For
more information, refer to "Delayed Start - Start Time" (P.314).
Off
Priority Send is not applied.
On
Priority Send is applied.
Off
Delayed Start is not applied.
On
Delayed Start is applied.