Table of Contents
Advertisement
June 2005
Remote Gateway 9150 unit configuration
This section shows the configuration settings for the Remote Gateway 9150 unit.
You can obtain a similar configuration printout by performing a configuration
download while connected to the Remote Gateway 9150 unit.
Note: Configuration settings are separated by commas (,).
Configuration example
This configuration example uses the settings identified in the network diagram
shown on page 353.
IPCFG 5.6.7.8,255.255.0.0,5.6.7.9
APPMODCFG 0,SPARE,TSIDSP
APPMODCFG 1,E,G729A,G729A
APPMODCFG 2,NC,NC
APPMODCFG 3,NC,NC
APPMODCFG 4,1,1,E,1,1,5556987,60655569870101,E,1,1,
5556988,60655569880101
APPMODCFG 5,NC,NC
APPMODCFG 6,NC,NC
APPMODCFG 7,NC,NC
SYSCFG 2, Remote site 1
ROUCFG 13:00,0,JAN-13-2000,911,#222,#333,#345,#456,E
ACCFG N
RLC Installation and Administration Guide
9150 unit's IP interface information:
IP address
Subnet mask
IP gateway
On-board DSP module (module 0) and
installed DSP application module
(module 1)
ISDN BRI module configuration
module number
PSTN number for each B-channel
SPID for each B-channel
Unit ID and node name
System configuration:
Emergency service number
System date and time
SPRE codes
Sample configuration files
371
Advertisement
Table of Contents
Troubleshooting
