Nortel RLC Installation And Administration Manual page 308

Reach line card
Hide thumbs Also See for RLC:
Table of Contents

Advertisement

Administration
Statistic
Rx Dropped
%Error
EthTx Mcast
EthTX Ucast
EthTx Disc
EthTx Err
282
Description
Identifies the number of superpackets that were
received out of sequence during the given hour.
This can result from one or more superpacket's being
lost or delivered out of order and, thus, discarded.
Identifies the packet error percentage that was
received during the given hour.
Remote Gateway 9100 Series begins calculating this
statistic by adding the number out-of-sequence
packets (Rx Dropped) to the number of overruns.
After multiplying this sum by 100, Remote Gateway
9100 Series then divides the product by the number
of received decoder packets (Rx Voice Samples) to
produce the error percentage.
This is an imprecise measurement due to the fact that
multiple packet losses or overruns can be counted as
a single error.
Identifies the number of multicast packets transmitted
during the given hour.
Multicast packets are packets intended for multiple
Ethernet addresses.
Identifies the number of unicast packets transmitted
during the given hour.
Unicast packets are packets intended for a specific
Ethernet address. Voice packets are always
transmitted as unicast packets.
Identifies the number of packets discarded on the
transmit side due to lack of resources, such as
memory buffers, during the given hour.
This can be an indirect result of excessive collisions
in the transmit queue.
Identifies the number of packets that could not be
transmitted because of errors within the packets.
RLC Installation and Administration Guide
Standard 4.0

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents