Data Port Configuration For 911X On The Cs 2100 Pbx - Nortel RLC Installation And Administration Manual

June 2005
Data port configuration for 911x on the
CS 2100 PBX
This section shows the configuration settings for the ATA data port on the
CS 2100 PBX. The data port provides the communication path between the RLC
and the Remote Gateway 911x unit, and must be configured as an ATA. ATAs
must be datafilled on the odd numbered LENs in the CS 2100. The odd
numbered ports correspond to ports 16-32 on both the RLC and the Remote
Gateway 911x series unit.
Configuration example
TABLE: LNINV
>pos 19 1 06 03
HOST 19 1 06 03
FLXA
>cha
CARDCODE: DR68AA
>
PADGRP: DONS
>
STATUS: WORKING
>
GND: N
>BNV: NL
>MNO: Y
>CARDTYPE: FLXA
>
TUPLE TO BE CHANGED:
HOST 19 1 06 03
FLXA
ENTER Y TO CONFIRM, N TO REJECT OR E TO EDIT.
LEN: HOST
TYPE: SINGLE PARTY LINE
SNPA: 972
DIRECTORY NUMBER:
LINE CLASS CODE:
RLC Installation and Administration Guide
DR68AA DONS
DR68AA DONS
19 1 06 03
6846779
M3904 WITH HANDSFREE
WORKING
Must be FLXA for 911x network port.
WORKING
This is the LEN address in the CS 2100.
Sample configuration files
N NL Y
N NL Y
365