Nortel RLC Installation And Administration Manual page 128

Installing the RLC
11 Do one of the following:
IF you are performing an
offline configuration,
102
THEN
Click on the Save to File button.
Result: Configuration Manager prompts
you to specify the directory path and file
name for the configuration file.
Specify the directory path and file name
for this configuration.
Note: The file name automatically
defaults to the name you entered as the
node name.
Ensure the Files of type field shows Text
File (*.TXT).
Click on the Save button to complete the
Save to File.
Result: The file is saved, then you are
asked if you want to configure another
board. If you do, click on the Yes button
and continue with step 3 on page 97.
You can open the information in this file
in Configuration Manager, then send and
save the file in the RLC's Flash memory
at another time. For instructions, refer to
"Working with configuration files" on
page 145.
RLC Installation and Administration Guide
Standard 4.0